5,148 Pages

Lethality redirects here. For the 2013 Mastery, see Lethality.

Armor penetration is a champion statistic that reduces the effective  of the target (vs. the champion with armor penetration).

Example: 10% armor penetration causes a target to take physical damage as though they had 10% less armor; 10% armor penetration is equivalent to fighting a target with 10% less armor.

The difference between armor penetration and armor reduction is that armor reduction can reduce armor below zero and affects any source of physical damage. The effects of armor penetration, on the other hand, are ignored once the target's effective armor drops to 0, and only the source of the armor penetration deals increased damage.

Lethality is a champion statistic introduced in season 2017 that is converted to flat armor penetration at a rate that increases based on your level, see formula below[1].

All champions have 0 base armor penetration, but it can be increased with items, runes, and some champion abilities.

Gold Value ​​​​​​

• Lethality has a gold value of 5 per point.

## Order of calculations

When attacking, armor penetration and armor reduction are considered in the following order: [2]

1. Armor reduction, flat
2. Armor reduction, percentage
3. Armor penetration, percentage
4. Lethality

Note: Base armor and bonus armor are calculated separately.

## Flat armor reduction

The target's armor is reduced by an amount. Flat armor reduction from different sources stacks additively and is distributed proportionally between base armor and bonus armor.

Example: 30 armor reduction against a 20 base armor and 40 bonus armor target will reduce base armor by 10 and bonus armor by 20, so the target will be reduced to 30 armor ((20 − 10) (40 − 20) = 30).

Flat armor reduction can reduce a target's armor below zero. For example, if an enemy with 10 armor has their armor reduced by 25, the enemy will have −15 armor.

## Percentage armor reduction

The target's armor is multiplied by a percentage (100% − the listed reduction). Applies to both base and bonus armor. Percentage armor reduction stacks multiplicatively and is ignored if the target's armor is 0 or less.

Example: 30% armor reduction multiplies the target's armor to 70%, so a target with 20 base armor and 40 bonus armor will be reduced to 42 armor ((20 × 0.7) + (40 × 0.7) = 42).

Percentage armor reduction reduces more armor on targets with higher armor. For instance, with 40% armor reduction, a target with 200 armor will lose 80 while a target with only 50 armor will lose 20. The increase in damage on the other hand isn't that big, because of the diminish return of armor at higher levels. On a target with 50 armor the actual physical damage will be increased by around 15%, where as the physical damage on targets with 200 armor by around 36% when having 40% armor reduction.

## Percentage armor penetration

The target's armor is treated as being multiplied by a percentage for purposes of damage calculation (100% − the listed penetration). Percentage armor penetration stacks multiplicatively and is ignored if the target's armor is 0 or less.

Example: 30% armor penetration causes the target to take damage as if its armor was multiplied by 70%, so a target with 20 base armor and 40 bonus armor will be treated as though it had 42 for purposes of damage (the target's actual armor value will not change, however) ((20 × 0.7) + (40 × 0.7 = 42).

Because the target's actual armor value does not change, anything else depending on that value also doesn't change (e.g. ).

Percentage armor penetration reduces more armor on targets with higher armor. For instance, with 40% armor penetration, a target with 200 armor will be considered as having 80 less while a target with only 50 armor will be considered as having 20 less. The increase in damage on the other hand isn't that big, because of the diminish return of armor at higher levels. On a target with 50 armor the actual physical damage will be increased by around 15%, where as the physical damage on targets with 200 armor by around 36% when using 40% armor penetration.

### Percentage bonus armor penetration

Percentage armor penetration that applies only to bonus armor.

Example: 30% bonus armor penetration multiplies the target's bonus armor to 70% without affecting base armor, so a target with 20 base armor and 40 bonus armor will be treated as though it had 48 for purposes of damage calculation (the target's actual armor value will not change, however). (20 + (40 × 0.7) = 48).
If the player has multiple sources of percentage bonus penetration, they stack multiplicatively:
Example: 10% armor penetration and 30% bonus armor penetration. (20  × 0.9)) + (40 × 0.7 × 0.9)) = 43.2).

Because the target's actual armor value does not change, anything else depending on that value also doesn't change (e.g. ).

Percentage bonus armor penetration makes a big difference on targets who build armor items, but will do nothing against base armor.

## Lethality

Lethality is a new statistic introduced in Season 2017 to replace flat armor penetration. It grants flat armor penetration using the following formula:

• Flat Armor Penetration = Lethality × (0.6 + 0.4 × level ÷ 18)

The target's armor is treated as being reduced by an amount for purposes of damage calculation, but cannot be reduced below 0. Flat armor penetration stacks additively.

Example 1: 20 lethality causes a target(level 18) to take damage as if its armor was 20 less, so a target with 30 armor will be treated as though it had 10 for purposes of damage calculation (the target's actual armor value will not change, however).

Because the target's actual armor value does not change, anything else depending on that value also doesn't change (e.g. ).

### Examples

Given 30 flat armor reduction and 30% armor reduction, and the target is affected by 10 flat armor penetration and 45% bonus armor penetration,

• Target A has 300 armor (100 base and 200 bonus armor).
• The 300 is reduced to 270 (90 base and 180 bonus armor) by the 30 armor reduction.
• The 270 is reduced to 189 (63 base and 126 bonus armor) by the 30% armor reduction.
• The 189 is considered to be 132.3 (63 base and 69.3 bonus armor) by the 45% bonus armor penetration.
• The 132.3 is considered to be 122.3 by the 10 armor penetration.
Target A takes damage as if it has 122.3 armor.
• Target B has 18 armor.
• The 18 is reduced to −12 by the 30 armor reduction.
• The −12 is not affected by any further calculations because it is less than 0.
• Target B takes damage as if it has −12 armor.

## Increasing armor penetration

### Champion abilities

• (affects only bonus armor)
• (affects only bonus armor)

## Reducing armor

### Champion abilities

Percentage Reduction
Flat Reduction

## Notes

• Armor penetration is a very valuable stat for physical damage dealing champions.
• Armor penetration benefits all sources of physical damage including all champion abilities that deal physical damage.
• For example, will benefit from armor penetration as it deals physical damage, however his will not benefit from armor penetration as it deals magical damage.
• The items that deal on-hit physical damage: , , , ,  and , will also benefit from armor penetration.
• Turrets are also subjected to armor penetration effects.

## Trivia

• The highest amount of lethality any champion can obtain is 103:
• Runes:
• - 7
• Items (sorted in order from highest to least lethality):
• 1 - 25
• 1 - 21
• 1 - 18 (including passive)
• 1 - 12
• 1 - 10
• 1 - 10
• Relevant mathematics:
• Items and runes =  +  +  +  +  +  +  = 103 lethality
• On Nexus Blitz, the highest amount becomes 119:
• Total = 83 + having purchased (18) or (18) = 119 lethality

## Start a Discussion Discussions about Armor penetration

• #### Fix the formula for Lethality.

3 messages
• where is it used/applied on the wiki?
• Yeah. I think I posted in the wrong section.
• #### Efficiency of Last Whipser

13 messages
• Blaisem wrote: All your graph does is look at a single dimension. You need a 6 or even 7 dimensional graph to really do it. It's too comp...
• gold/gold of AD with the purpose of defining when it's better to build AD or when it's better to build Last Whisper. The only reason...
Community content is available under CC-BY-SA unless otherwise noted.